8300 is a single-component, neutral-curing silicone sealant with good bonding performance to stainless steel, aluminum alloy, glass, wood and other building materials, after artificially accelerated weather aging test, the physical and chemical properties of the sealant no significant changes. 8300 use, squeeze the rubber gun from the sealant cartridge into the joints to be sealed, the sealant at room temperature to absorb moisture in the air, curing into an elastomer, forming Effective sealing.
- 8300 is one-component, easy to use, with good extrudability and thixotropy in the temperature range of 4°C~40°C. It can be directly applied by extruding with a glue gun.
-It has fast curing speed and good adhesive performance to stainless steel, aluminum alloy glass, wood and other construction materials.
-Each head of stainless steel doors and windows bonding caulking sealing.
-Aluminum alloy, glass, plastic steel and other building doors and windows bonding caulking sealing.
-Various interior decorative bonding and sealing; other general requirements of industrial use
-Can't be used as structural sealant
-Not suitable for all material surfaces containing oozing grease, plasticizers or other organic solvents
-Not suitable for use in dense and impermeable places
-Not suitable for use on frosty or wet surfaces
-Not suitable for use in places with continuous water immersion or frequent moisture
-Not suitable for construction when the surface temperature of the material is below 4°C or above 40°C
- 8300 is packed in 300ml (1×24 plastic tube.
8300 is available in gray, transparent and other colors as required by the user.
●Storage and expiration date
-8300 should be stored in a cool, dry place at or below 27°C for 9 months from the date of manufacture.
-This product is not toxic when fully cured, but eye contact should be avoided until cured, if contact with eyes, flush with plenty of water and seek medical attention. This product will release alcohols during the curing process, attention should be paid to ventilation in the construction and curing area to avoid adverse effects on people due to the concentration of these substances.
Generally no maintenance is needed, if the sealant seam is broken, replace the damaged part, just use solvent to remove the accumulated dirt, and then fill with sealant.
-It is the customer's responsibility to test the proposed sealant application and to determine if the performance meets the customer's application requirements.
You have no items to require