10000

Product Introduction

10000 is a neutral curing silicone sealant designed and developed specifically for the bonding requirements of solar PV module aluminum bezels and junction control boxes, curing at room temperature using moisture in the air. It provides excellent bonding and sealing properties to many materials such as metals, plastics, ceramics and glass, and is weather resistant for solar PV module bezels and junction box applications. The product is also suitable for electronic communication equipment, automotive accessories and instrumentation industry bonding and sealing.

Product characteristics

1. Good adhesion, no primer required for most substrates.

2. Neutral curing, non-corrosive to most metals.

3. Outstanding electrical insulation.

4. Outstanding climate resistance, ozone resistance and chemical erosion resistance.

5. excellent resistance to high and low temperatures, with continuous operation from -40°C to 260°C.

Main applications

1. for bonding and sealing of aluminum bezels and junction boxes of Chidaiyang Energy PV modules.

2. used for electronic or circuit board part of the electronic components coating protection, bonding, sealing and reinforcement, instrumentation industry in the parts bonding and case bonding seal.

3. Can be used for the protection of small electronic components, circuit boards, sensors, etc. potting.

4. General bonding of metal, glass, plastic, etc.

5. Various general sealing in industrial production, such as freezer doors, refrigerators, car lamps, cold storage, refrigerated vehicles, etc.

Operation and safety

1. The product with appropriate solvents such as alcohol, acetone, methyl ethyl ketone, etc., thoroughly clean the surface of the substrate; the product is completely cured and not toxic, but before curing should avoid contact with the eyes, if contact with the eyes, please rinse with a lot of water, and find a doctor to deal with; uncured products should avoid contact with small children. This product will release alcohols or ketoximes during the curing process, attention should be paid to ventilation in the construction and curing area to avoid adverse effects on people due to the concentration of these substances. Please avoid contact with skin for a long time, otherwise it may cause itching.

Package

2. Packed in 300ml (1×24pcs) plastic tube or 100rnl aluminum tube.

Color

3. Regular colors are black, white, and special colors can be produced according to customers' requirements.

Storage and expiration date

1. It is non-hazardous, please store it in a cool and dry place under 27°C. It is valid for 9 months.

Safety instructions

Maintenance

1. Generally no maintenance is needed, if the sealant seam is broken, replace the damaged part, just use solvent to remove the accumulated dirt and fill with sealant.

Testing

2. It is the customer's responsibility to test the proposed sealant application accordingly and to determine if the performance meets the customer's application requirements.